Sunday, September 11, 2011
How'd you break your moped?
So I got a sweet deal on a fully loaded grande; malossi hit, carb, pipe, variator...the guy I bought it from had been having trouble with it and when drill starting it, sucked the decomp into the engine. Apparently it wasn't put together correctly and shot into the cylinder. I knew that this wouldn't have caused much problems because it can't get passed the piston. I tried convincing him to keep the bike and that it was fine, but he insisted that he wanted to sell it. So i jumped on it at a unbelievable good price.
The decomp situation should have been an omen...
I took the engine apart and the first thing I noticed was that HE DIDN'T PUT ANY CIRCLIPS ON THE PISTON!!! WTF!!! Did he just forget? Did he think they weren't necessary? Who knows...sure enough on inspection of the cylinder there is a nice mark left by the piston pin.
It's not scored that badly and isn't raised. So other than a slight loss of compression, it should still run. Wheh!
And then we get to the crank...notice anything wrong here?
let's give you a close up...
WHAAATTT??? That's right...you're looking at A BOLT that was WELDED on the crank. The crank must have been broken in the past and the "fix" was to just weld a bolt upside down in there. Unfortunately the crank is hardened and so the weld isn't actually welded. It's only a matter of time before it just breaks off.
Other minor issues of note: no case gasket...just slathered some indian head on there...nuts for the front wheel were finger loose as well as the front fender...
All in all however I'm getting this thing tightened up and rebuilt. Should be another reliably fast bike (fingers crossed)
Monday, August 22, 2011
almost...
A few weeks back Nichols helped me with the vespino. This thing has been such a pain in the ass...we worked it down to a possible problem with the decomp. The design of this bike is annoying at times (most times) because just to check the head you have to take so much of the bike apart...the engine is tucked up in there. So we used we used a car lift to hold the front of the bike up.
Unnecessary, yes...makes the job easier...yes. When we took the head off to inspect it, here's what we found...
Brand new metrakit head with a chunk missing from the decomp area. There's no way that the decomp will seal properly with that. We tapped the decomp hole and threaded in a bolt with JB weld to seal it up. I took it down the street and instantly it started right up. Unfortunately it had very little gas and I forgot the tank key at my garage...woof. A day or so later I got it doing wheelies UPHILL down my alley. Excitedly I rode it to moped Wednesday...it was running fine until about 3 blocks from the Monkey Wrench; it just slowly died. Soft seize? Nope. Compression still good? Yep. Turns out it was the bike lever cable that I installed. The cable came loose from the housing. Yesterday I replaced the cable housing and still no dice...vespino time out...again...
Tuesday, July 19, 2011
Thursday, July 14, 2011
hijinx
Still little progress on the vespino build as life seems so crazy lately. But I am finding time to hang out with bandits...just not working on bikes. The bandits have an EPIC 4th of July celebration every year with home made fireworks (bombs), etc. this year however, Kentucky law changed and we had access to all the fun things that we used to have to drive to Indiana to get. Here's a great idea for using full face helmets for something other than they were designed for:
Notice that Sean thought he'd cheat by using 2 roman candles...but he got what was coming to him. karma ladies and gents...karma...
Notice that Sean thought he'd cheat by using 2 roman candles...but he got what was coming to him. karma ladies and gents...karma...
Friday, June 17, 2011
Friday, June 10, 2011
Holy Hole...and Peter's Piper...
The other day I was helping my friend Michael do some case matching for his Grande and dremeling we discovered a cavern in the his cases.

It's just some sort of casting flaw...I guess It'll be OK and we'll just have to smooth the transition into the case. Unfortunately he also blew through the wall of the cases and will have to add some aluminum and continue matching. Bonerjamz!
Also, a local moped dude named Damon bought a rare pipe from Italy.



I'd heard that the gianelli pipes were pretty sweet. So far the reports I get from him are that he really likes the pipe...although I haven't seen it yet myself. He's trying to keep his ciao stock and I'd like to think that this pipe is meant for something so much more...
It's just some sort of casting flaw...I guess It'll be OK and we'll just have to smooth the transition into the case. Unfortunately he also blew through the wall of the cases and will have to add some aluminum and continue matching. Bonerjamz!
Also, a local moped dude named Damon bought a rare pipe from Italy.
I'd heard that the gianelli pipes were pretty sweet. So far the reports I get from him are that he really likes the pipe...although I haven't seen it yet myself. He's trying to keep his ciao stock and I'd like to think that this pipe is meant for something so much more...
Subscribe to:
Posts (Atom)


